For use with CLOM CamGo (camgo) ONLY
The camera must be logged in with a user, and there must be sufficient battery power and NEVER interrupt the update whilst it is in progress (e.g. by pressing the on/off switch)

It's that simple:

Copy both files to the SD card

(one file shows 0 KB, this is not a problem for the process).

    Insert the SD card into the card reader on the PC, or
    Connect the PC with the enclosed USB cable

 The date of the respective firmware version can be seen: yy ... year; mm ... month; dd ... day

Firmware update

    a. Insert the SD card into the camera

    b. Switch to SETUP push

c. check whether „Firmware updates“appears”

    d. Wait (approx. 10–20 seconds) until „Firmware updating“ disappears from the screen

    e. Switch it off afterwards. (Set the switch to OFF)

    f. Remove the SD card from the camera and format it on your PC.

   g. Insert the formatted SD card back into the camera.

  h. Move the switch to the SETUP position

  i. Restore factory settings (recommended): Menu – Settings – Reset – Run

NEVER switch off the camera during the update.

Version history

No updates required.