- Use ONLY FOR ICU4R (icucam4)
- The camera must be logged in with a user.
- Sufficient battery capacity must be available
- NEVER interrupt the running update (e.g. by pressing the switch).
It's that simple:
Copy both files to the SD card
(one file shows 0 KB, this is not a problem for the process).
a. Insert the SD card into the PC for this purpose
or connect PC with enclosed USB cable
The date of the respective firmware version can be seen: yy ... year; mm ... month; dd ... day
a. SD card in the camera
b. Press and hold the up arrow key "▲".
c. Switch to SETUP push
d. Still hold down the arrow key "▲".
e. When "Firmware update" appears, release the arrow key "▲".
f. Wait (approx. 10-20s ) until "Firmware update" disappears from the screen.
g. Switch off afterwards
h. Switch to SETUP push
i. Restore factory settings -> Camera menu "Settings".
NEVER switch off the camera during the update.
Version 2020 05 20:
Bugfixes: Photo&Video, automatic shutdown when batteries are empty, button operation in setup mode, preparation "photo request", reduction of energy consumption, improvement of network connection, energy display 18650 batteries,
Version 2020 06 29:
Bugfixes: Creation of the InitKey as Qr-Code
Version 2020 07 13
Bugfix: Menu description
Version 2020 09 10
Bugfix: Improvements in communication
Version 2020 09 11
Version 2020 11 16
Improvement SD card read/write
Status update now takes place between 3:00 and 4:00 a.m.
(previous versions between 15:00 and 16:00)
Status Update Bugfix Camera Mode
Version 2020 12 01
Improvement of the language display
Version 2021 01 29
Stabilisation of the status update
Version 2021 03 30
Bugfix login and registration
Version 2021 05 11
Bugfix green pixelated images